Hot Melt Adhesive Blog
Guides on EVA hot melt adhesive selection, application and troubleshooting — written by the technical team at a working hot melt factory in Wuhan, China.
How to Choose the Right Edge Banding Hot Melt Adhesive
A practical guide to selecting edge banding hot melt adhesive: matching softening point, viscosity and open time to your edge bander, banding material, and panel type — plus the glue-line defects each parameter causes.
TechnicalEVA Hot Melt Adhesive Temperature Guide: Application, Open Time & Bonding
The complete EVA hot melt adhesive temperature reference: correct glue pot and application temperatures, how temperature changes viscosity and open time, and troubleshooting overheating problems.
Buying GuideEVA vs PUR Hot Melt Adhesive: Which One Should You Choose?
EVA vs PUR hot melt adhesive compared: chemistry, water and heat resistance, bonding strength, cost, application methods, and how to decide which is right for your edge banding or assembly line.
TechnicalEVA Hot Melt Glue Granules: Storage, Handling & Shelf Life Guide
How to store EVA hot melt glue granules correctly: temperature, humidity, packaging, FIFO stock rotation, safe handling of molten adhesive, and how to tell if granules have gone bad.
BasicsWhat Is EVA Hot Melt Adhesive? Composition, Properties & Applications
A complete introduction to EVA hot melt adhesive: what it is made of, its key properties (softening point, viscosity, open time), common forms like granules and sticks, and its main industrial applications.